Related Links
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 3, Volume 32, Issue 3 - Serial Number 60, September 2017, Pages 334-344 PDF (350.85 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2017.22966.1261 | ||
| Author | ||
| Amir Nourbakhsh* | ||
| Associate Prof., Wood and forest products division, Research Institute of Forests and Rangelands, Agricultural Research Education and Extension Organization (AREEO), Tehran, Iran | ||
| Abstract | ||
| In this research was to use the effects micro cellulose, and Multi walled Carbon Nanotube on the mechanical properties of wood plastics composites. This article presents the application of Multi walled Carbon Nanotube in order to evaluate and compare their suitability as reinforcement for thermoplastics. The effects of loading micro cellulose and Multi walled Carbon Nanotube content on the mechanical properties were also studied. The results showed that mechanical properties of the composites made with 50 micron cellulose and 1.5 and 2.5 % of Multi walled Carbon Nanotube were significantly superior to those of the lower length (20 micron) and control samples. Addition of Multi walled Carbon Nanotube could enhance the mechanical properties of the blends, due to the improvement of interface bond between the filler and matrix of wood plastics composites. The significant improvements in mechanical properties of the blends composites made with Multi walled Carbon Nanotube and micro cellulose were further supported by SEM and TEM micrographs. | ||
| Keywords | ||
| Composite; MECHANICAL PROPERTIES; Micro- cellulose; Multi walled Carbon Nanotube | ||
| References | ||
|
-Annual book of ASTM standards, 1999. American Society for Testing and Materials, 100 Barr Harbor Dr., West Conshohocken, PA 19428, United States -Ashori, A. and Nourbakhsh A., 2009. Characteristics of wood–fiber plastic composites made of recycled materials: Waste Manag Vol.29: 5pp. -Han, G., Lei, Y., Wu, Q., Kojima, Y. and Suzuki, S., 2008. Bamboo-fiber filled high density polyethylene composites; effect of coupling treatment and nanoclay. J Polym Environ Vol.21: 15pp. -Hristove, V.N., Vasileva, S.T., Krumova, M. and Michler, R., 2004. Deformation mechanisms and mechanical properties of modified polypropylene/wood fiber composites. Journal of Polymer Composites. 25(5). 1015-1022. -Li Q. and Matuana LM., 2003. Surface of cellulosic materials modified with functionalized polyethylene coupling agents. J Appl Polym Sci Vol:88:9 pp. -Meyrs E.G., Chahyadi I.S., Gonzalez C. and Coberly C.A., 1993. Wood fibres/polymer composites: fundamental concepts, processes, and material options. Forest Product Society, Madison, USA -Morreale M., Scaffaro R., Maio A. and La Mantia F.P., 2008. Effect of adding wood flour to the physical properties of a biodegradable. Compos Part A Vol:39:14 pp -Nourbakhsh A., Ashori A., and Jahan-Latibari A., 2010. Evaluation of the physical and mechanical properties of medium density fiberboard made from old newsprint fibers. J Reinf. Plast. Compos Vol:29:7 pp -Nourbakhsh, A. and Ashori, A., 2008. Fundamental Studies on Wood-plastic Composites: Effects of Fiber Concentration and Mixing Temperature on the Mechanical Properties of Poplar/PP Composite, Polymer Composites, 29(5): 569_573. -Sheng, S., 2003. Application of Nano-Composites and Woodfiber Plastics for Microcellular Injection Molding. 7th International Conferences on Woodfiber – Plastics Composites May 19-20 2003 Monona Terrace Community & Convention Center Madison, Wisconsin, USA -Stark, N.M. and Rowlands R.E., 2003. Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites. Wood Fiber Sci Vol:35: 8pp -Wang S-Y., Yang T-H., Lin L-T., Lin C-J. and Tsai M-J., 2007. Properties of low formaldehyde-emission particleboard made from recycled wood-waste chips sprayed with PMDI/PF resin. Build Environ Vol: 42:8 pp -Zhang, W., Chen, J., Dadi Bekele, L., Liu, Y., Duns, J.G. and Jin, L., 2016. Physical and Mechanical Properties of Modified Wheat Straw-Filled Polyethylene Composites. BioResources, 11 (2), 4472- 4484 -Zhou,Y., Rangari, V., Mahfuz, H., Jeelani, Sh. and Mallick, P.K., 2005. Experimental study on thermal and mechanical behavior of polypropylene, talc/polypropylene and polypropylene/ clay nanocomposites. Mater Sci Eng A. Vol:402: 9 pp. | ||
|
Statistics Article View: 638 PDF Download: 469 |
||
Journal management system. designed by sinaweb