Related Links
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 4, Volume 23, Issue 1 - Serial Number 28, March 2008, Pages 40-49 PDF (376.7 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2008.117402 | ||
| Authors | ||
| Yahya Hamzeh* 1; Mohammad hassan Ekhtera2; Ali Abdolkhani3; Sohila Ezadyar4; Kambiz Pourtahmasi5 | ||
| 1Assistance Professor, Department of Wood and Paper Sciences and Technology, Faculty of Natural Resources, University of Tehran | ||
| 2MS.c, Department of Wood and Paper Sciences and Technology, Faculty of Natural Resources, University of Tehran | ||
| 3Ph.D. - Student, Department of Wood and Paper Sciences and Technology, Faculty of Natural Resources, University of Tehran | ||
| 4Instructor, Department of Wood and Paper Sciences and Technology, Faculty of Natural Resources, University of Tehran | ||
| 5Department of Wood and Paper Science and Technology, Faculty of Natural Resources, University of Tehran | ||
| Abstract | ||
| In this study the effects of several parameters on the sizing efficiency of test liner using poly aluminum chloride and rosin under neutral condition in reverse and premixing sizing processes were investigated. The results indicated that the individual effects of poly aluminum chloride amount, rosin amount, interval time as well as interaction effect of poly aluminum chloride -rosin amounts in both sizing processes affect significantly sizing performance. The most important variable was the poly aluminum chloride amount. The effect of poly aluminum chloride amount on the sizing efficiency depended on the properties of fiber surfaces. This study showed that the interval time on the sizing efficiency is significant. To obtain an identical degree of sizing, it is possible decrease the amount of poly aluminum chloride and rosin amounts by increasing the interval time. In addition, the results confirmed two different mechanisms involved in the premixing sizing process. | ||
| Keywords | ||
| Test Liner; Rosin; Poly Aluminum Chloride; Neutral Papermaking; Reverse Sizing; Premixing Sizing | ||
| References | ||
|
Chen, Y., Long, Z., Xie, L., and Fang, B. (2001). “The factors affecting rosin neutral sizing,” China Pulp Paper 2001(2), 20-24. Davison, R. W., in: Internal Sizing, R. W. Hagemeyer, D. W. Manson, and M. J. Kocurek, eds., Pulp and Paper Manufacturing. Series, Vol. 6, 1992, Chapt. 3, 39–64. Hartong, B., and Deng, Y. (2004). “Evidence of ester bond contribution to neutral to alkaline rosin sizing using polyethylenimine-epichlorohydrin as a mordant,” J. Pulp Paper Sci. 30(7), 203-209. Hubbe, M. (2007). “Paper’s resistance to wetting – a review of internal sizing chemicals and their effects” BioResources 2(1), 106-145. Isolati, A. (1989). “The use of aluminum polychloride for internal rosin sizing of paper,” Paperi Puu 66(9), 521-2, 525-6, 529-30. Ito, K., Isogai, A., and Onabe, F. (1999). “Rosin-ester sizing of alkaline papermaking,” J. Pulp Paper Sci. 25(6), 222-226. Katz, G., House, L.W., Alexander, D.E., et al., (2003). “Internal paper sizing improvements” U.S. pat. 6540877. Kitaoka, T., Isogai, A., and Onabe, F. (1995). “Sizing mechanism of emulsion rosin size-alum systems. Part 1. Relationships between sizing degrees and rosin size or aluminum content in rosin-sized handsheets,” Nordic Pulp Paper Res. J. 10(4), 253-260. Liu, Y., Niu, M., and Zhang, Y. (2004). “The research of rosin ester neutral sizing agent,” Proc. 2nd ISTPPBFP, Oct. 13-14, 2004, Nanjing Forestry University, China, 441-443. Marton J (1989) “Fundamental aspects of the rosin sizing process: mechanistic differences between acid and soap sizing”. Nordic Pulp Paper Res J 4:77–80 Parks E. J., Hebert R. L. (1972) “Thermal analysis of ion exchange reaction products of wood pulps with calcium and aluminum cation”. Tappi J 55:1510–1514 Subrahmanyam,S., Biermann,C.J. (1992) “Generalized rosin soap sizing with coordinating elements” Tappi J. 75:223 Zou Y., Hsieh J. S., Wang T. S., Mehnert E., and Kokoszka J. (2004). “The mechanism of premixing rosin sizes for neutral-alkaline papermaking,” Tappi J. 3(9), 16-18 | ||
|
Statistics Article View: 454 PDF Download: 357 |
||
Journal management system. designed by sinaweb