Nourbakhsh, A., Hosseinzadeh, A., Doosthosseini, K., Kargarfard, A., Radkyan, M. (2005). UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION. , 20(No., 1), 111-132. doi: 10.22092/ijwpr.2005.117578
Amir Nourbakhsh; Abdolrahman Hosseinzadeh; Kazem Doosthosseini; Abolfazl Kargarfard; Mazyar Radkyan. "UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION". , 20, No., 1, 2005, 111-132. doi: 10.22092/ijwpr.2005.117578
Nourbakhsh, A., Hosseinzadeh, A., Doosthosseini, K., Kargarfard, A., Radkyan, M. (2005). 'UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION', , 20(No., 1), pp. 111-132. doi: 10.22092/ijwpr.2005.117578
Nourbakhsh, A., Hosseinzadeh, A., Doosthosseini, K., Kargarfard, A., Radkyan, M. UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION. , 2005; 20(No., 1): 111-132. doi: 10.22092/ijwpr.2005.117578

UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION

تحقیقات علوم چوب و کاغذ ایران
Article 6, Volume 20, No., 1 - Serial Number 22, May 2005, Pages 111-132    PDF (259.59 K)
Document Type: Research Paper
DOI: 10.22092/ijwpr.2005.117578
Authors
Amir Nourbakhsh1; Abdolrahman Hosseinzadeh2; Kazem Doosthosseini3; Abolfazl Kargarfard4; Mazyar Radkyan5
1Wood and forest products division, Research Institute of Forests and Rangelands, Agricultural Research Education and Extension Organization (AREEO), Tehran, Iran
2Wood and forest products division, Research Institute of Forests and Rangelands, Agricultural Resear
3Wood and paper science and technology department, of natural Resources faculty, university of Tehran. IRAN
4Wood and Forest Products Science Research Division, Research Institute of Forests and Rangelands, Tehran, Iran,
5Islamic Azad University, Karaj, Iran
Abstract
In this investigation feasibility of Beech slabs in particleboards production were prepared at three different contents resin of 9, 10, and 11 percent, press temperatures of 165°C and 175°C and hardener contents of 1.5 and 2.5 percent.
Based on the DIN-68763 standard physical and mechanical properties including MOR, MOE, IB, and thickness swelling (after 2 and 24 immersion in water) were tested.
According to the factorial experimental design at completely random test was analysis. The potential utilization of Beech slabs residues in particleboard production including: resin content (11%), press time (6 min.), press temp. (175°C), and hardener contents (2.5%) were found.
Keywords
PARTICLEBOARDS; beech; SLABS RESIDUES; press time; RESIN CONTENT; press temperature; HARDENER CONTENT
References
Statistics
Article View: 1,262
PDF Download: 615


counter
Journal management system. designed by sinaweb