Evaluation of Applied Performance of Thermally-Modified Fir Wood by Retification Process

-Abde, M., Mootab,Saei, A., Mohebby, B., and Kazemi-Najafi, S. 2015. Influence of temperature and holding time in oil heat treatment on physical and mechanical properties of fir wood (Abies Sp.). Forest and Wood Products, 68(2): 303-315.

-Biswas, A.K., Yang, W., and Blasiak, W., 2011. Steam Pretreatment of Salix to Upgrade Biomass Fuel for Wood Pellet Production. Fuel Processing Technology, 92: 1711–1717.

-Boonstra, M.J., vanAcker, J., Kegel, E., and Stevens, M., 2007. Optimization of a Two-Stage Heat Treatment Process: Durability Aspects. Wood Science and Technology, 41: 31–57.

-Bytner, O., Laskowska, A., Drożdżek, M., Kozakiewicz, P., and Zawadzki, J., 2021. Evaluation of the Dimensional Stability of Black Poplar Wood Modified Thermally in Nitrogen Atmosphere. Materials, 14, 1491.

-Esteves, B., Marques, A.V., Domingos, I., and Pereira, H., 2007. Influence of Steam onthe Properties of Pine (Pinuspinaster) and Eucalypt (Eucalyptus globulus) Wood. Wood Science and Technology, 41: 193–207.

-Hajihassani, R., Mohebby, B., Najafi, S.K., and Navi, P., 2018. Influence of combined hygro-thermo-mechanical treatment on technical characteristics of poplar wood. Maderas. Ciencia y tecnología, 20(1), 117-128.

-Hietala, S., Maunu, S., Sundholm, F., Jämsä, S., and Viitaniemi, P., 2002. Structure of thermally modified wood studied by liquid state NMR measurements. Holzforschung, 56: 522-528.

-Huang, C.X., He, J., Min, D.Y., Lai, C.H., Yu, S.Y., and Yong, Q., 2016. Effect of dilute acid pretreatment on the lignin structure of Moso bamboo inner skin. Journal of Forestry Engineering, 1, 55–60.

-Huang, C.X., Lin, W.Q., Lai, C.H., Li, X., Jin, Y.C., and Yong, Q., 2019. Coupling the post‐extraction process to remove residual lignin and alter the recalcitrant structures for improving the enzymatic digestibility of acid pretreated bamboo residues. Bioresource Technology, 285, 121355, Doi:10.1016/j.biortech.2019.121355.

-İmirzi, H.Ö., Ülker, O., and Burdurlu, E., 2014. Effect of densification temperature and some surfacing techniques on the surface roughness of densified Scots pine (PinussylvestrisL.). BioResources, 9, 191–209.

-Kamdem, D.P., Pizzi, A., and Jermannaud A., 2002. Durability of Heat-Treated Wood. Holz als Roh-und Werkstoff, 60:1–6.

-Kollmann, F., and Fengel, D., 1965. Änderungen der chemischen zusammensetzung von holzdurch thermische behandlung. Holz als Roh-und Werkstoff, 23, 461–468.

-Kozakiewicz, P., Drożdżek, M., Laskowska, A., Grześkiewicz, M., Bytner, O., Radomski, A., and Zawadzki, J., 2019. Effects of thermal modification on the selected physical properties of sapwood and heartwood of black poplar (Populus nigraL.). BioResources, 14, 8391–8404.

-Lee, C.H., Yang, T.H., Cheng, Y.W., and Lee, C.J., 2018. Effects of thermal modification on the surface and chemical properties of mosobamboo. Construction and Building Materials, 178, 59–71.

-Liu S., 2008. A kinetic model on autocatalytic reactions in woody biomass hydrolysis. Journal of Biobased Materials and Bioenergy., 2: 135–147.

-Mania, P., and Gasiorek, M., 2020 Acoustic Properties of Resonant Spruce Wood Modified Using Oil‐Heat Treatment (OHT). Materials, 13, 1962, doi:10.3390/ma13081962.

-Metsa-Kortelainen, S., Antikainen, T., and Viitaniemi, P., 2006. The water absorption of sapwood and heartwood of scots pine and norway spruce heat-treated at 170 ºC, 190 ºC, 210 ºC and 230 ºC. Holz als Roh- und Werkstoff, 64 (3): 192–197.

-Popescu, C.M., and Popescu, M.C., 2013. A near infrared spectroscopic study of the structural modifications of lime (tilia cordatamill.) wood during hydro-thermal treatment. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 115:227–233.

-Rowell R.M., 2005. Handbook of Wood Chemistry and Wood Composites, chapter11: Chemistry of Wood Strength, 432-435.

- Rautkari, L., Honkanen, J., Hill, C.A.S., Ridley-Ellis, D., and Hughes, M., 2014. Mechanical and physical properties of thermally modified Scotspine wood in high pressure reactor under saturated steam at 120, 150 and 180 °C. European Journal of Wood and Wood Products, 72: 33–41.

-Sundqvist, B., Karlsson, O., and Westermark, U., 2006. Determination of formic-acid and acetic acid concentrations formed during hydrothermal treatment of birch wood and its relation to colour, strength and hardness. Wood Science and Technology, 40: 549–561.

- Shi, J.L., Kocaefe, D., and Zhang, J., 2007. Mechanical behaviour of queébec Wood Species Heat-Treated Using Thermo Wood Process. Holz als Roh- und Werkstoff, 65(4): 255-259.

-Sweet, M.S., Winandy, J.E., 1999. The influence of degree of polymerization (DP) of cellulose and hemicellulose on the strength loss offire-retardant-treated wood, Holzforschung, 53: 311–317.

-Tanaomi, A.R., Mohebby, B., and Ghahri, S., 2013. The effect of oleothermal treatment on physical and mechanical properties of beech wood. Journal of Wood and Forest Science and Technology, 19(3): 111-126.

-Tjeerdsma, B.F., and Militz, H., 2005. Chemical Changes in Hydrothermal Treated Wood, FTIR Analysis of Combined Hydro Thermal and Dry Heat-Treated Wood. Holz als Roh- und Werkstoff, 63 (2): 102-111.

-Vernois, M., 2000. Heat treatment of wood in France-State of the art. Centre Technique du Bois et de l’Ameublement, Paris, França.

-Welzbacher, C.R., Wehsener, J., Rapp, A.O., and Haller, P., 2008. Thermo-Mechanical Densification Combined with Thermal Modification of Norway Spruce (Picea abies Karst) in Industrial Scale-Dimensional Stability and Durability Aspects. Holz als Roh- und Werkstoff, 66: 39–49.

-Whistler, R.L., and Chen C.C., 1991. Hemicelluloses, in: Lewin, Goldstein(Eds.), Wood structure and composition, International fiber science and technology series, Vol. 11, Marcel Decker, Inc., New York, NY, 287–320.

-Winandy, J.E., and Rowell, R.M., 1984. The chemistry of wood strength, in: Rowell R.M. (Ed.) The Chemistry of solid wood, American Chemical Society, Washington, DC, 211–256.