Gholipor, T. (2015). Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite. , 30(WINTER 4), 595-605. doi: 10.22092/ijwpr.2015.101600
Taherh Gholipor. "Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite". , 30, WINTER 4, 2015, 595-605. doi: 10.22092/ijwpr.2015.101600
Gholipor, T. (2015). 'Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite', , 30(WINTER 4), pp. 595-605. doi: 10.22092/ijwpr.2015.101600
Gholipor, T. Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite. , 2015; 30(WINTER 4): 595-605. doi: 10.22092/ijwpr.2015.101600

Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite

تحقیقات علوم چوب و کاغذ ایران
Article 6, Volume 30, WINTER 4 - Serial Number 53, December 2015, Pages 595-605    PDF (326.98 K)
Document Type: Research Paper
DOI: 10.22092/ijwpr.2015.101600
Author
Taherh Gholipor
Abstract
In this study the effect of type of polymer including polyvinyl chloride and high density polyethylene in production of wood plastic composite by using of canola straw waste in two forms, with and without pith (depithed), in combination with wood flour were investigated. Five levels of lignocellulosic materials were used consisting of 100 % wood flour, 100% canola flour including pith, 100% depithed canola flour, 50% wood flour plus 50% canola flour with pith and 50% wood flour plus 50% depithed canola flour. Physical properties of boards including, thickness swelling and water absorption after 2 and 24 hours immersion in water and mechanical properties such as screw withdrawal strength perpendicular on the surface, flexural strength and modulus of elasticity according to EN were evaluated. The results of this study showed that wood plastic composite made of high density polyethylene had better physical and mechanical properties compared with polyvinyl chloride and using of canola flour combined with wood flour lead to increasing flexural strength and modulus of elasticity, but decreased screw withdrawal strength perpendicular on the surface. Using of lignocellulosic filler material by combining of 50% wood flour plus 50 % depithed canola flour combined with high density polyethylene powder can be produced wood plastic composite board with suitable physical and mechanical properties.
Keywords
HIGH DENSITY POLYETHYLENE; polyvinyl chloride; canola straw; lignocellulosic materials; PHYSICAL AND MECHANICAL PROPERTIES
References

 

- Ayrilmis, N., Jarusombuti, S., Fueangvivat, V., Bauchongkol, P., and Whitem, RH., 2011. Core fiber reinforced polypropylene composite panel for automotive interior applications. Fiber polym, 12:919-926.

-  Bajwa, S., Bajwa, D., Holt, G., Coffelt, T., and  Nakayama, F., 2011.  Properties of thermoplastic composites with cotton and guayule biomass residues as fiber fillers. Industrial Crops and Products,  33: 747–755.

- EN 310. (1996). Wood based panels, determination of modulus of elasticity bending and bending strength. European Standardization Committee، Brussell.

- EN 317. (1996). Particleboards and fiberboards، determination of swelling in thickness after immersion. European Standardization Committee، Brussell.

-  EN 320. 1996. Fiberboards, determination of resistance to axial of screw. European Standardization Committee، Brussell.

- Karimi, A.N., Roohani, M.,  Parsapazouh. D., Ebrahimi, GH., 2004 A Study of the Feasibility of the Use of Lignocelluosic, Bagasse and Kenaf Fibers in the Manufacture of Fiber-Polypropylene Composites, Iranian Journal of Natural Resources, 57(3):379-390.

-Lai, S., Yeh, C., Wang, Y., Chan, C. and Shen H., 2003. Comparativestudy of maleated polyolefin as compatibilizers for polyethylene/wood flour composites. Journal of Applied Polymer Science, 87(4): 487–496.

- Najafi, A., 2007. Evaloation of many properties of Wood Plastic Composites Made from Lignocellosic Fillers and Recycled HDPE. Ph.D. thesis. IAU. 175 pp.

- Nourbakhsh, A., Ashori, A., 2010. Wood plastic composite analysis of mechanical properties. Journal of Bioresource Technology, 101: 2525-2528.

- Panthapulakkal, S., and Sain, M., 2006. Injection molded wheat straw and corn stem filled polypropylene composites. Journal of Polymers and the Environ, 14(3): 265- 272.

- Panthapulakkal, S., Sain, M. and  Law, S., 2003. Effect of coupling agents on rice-husk-filled HDPE extruded profiles. Polymer International,54 (8):137–142.

-Rangavar, H., Oromiehie, A., Safarpour, A., and Gholipour, T., 2013. Study of utilizing recycled polyvinyl choloride (PVC) in wood plastic composite. Iranian Journal of Wood and Paper Science Research. 28: 35-47.

- Razavi, M., Jafarzadeh, F., Oromiehie, A. and Langroudi, A., 2006. Mechanical properties and water absorption behavior of chopped rice husk- filled polypropylene composites. Iranian Polymer Journal, 9: 757-766.

- Taheri, F., Enayati, A., Oromiehie, A. and Tajvidi, M., 2012. Effect of different Polypropylene grades and coupling agent on the properties of wood plastic composites. Iranian journal of wood and paper science research. 26(4): 757-771.

-Yang, S., Kim, J., Son, J., Park, J., Lee, J. and  Hwang S., 2004. Rice-husk filled polypropylene composites; mechanical and morphological study. Composite Structure, 63(3): 305–312.

-Yang, S., Wolcott, M., Kim, H., Kim, S. and Kim, H., 2007. Effect of different compatibilizing agents on the mechanical properties of lignocellulosic material filled polyethylene bio-composites.Composite Structures, 79(4): 369–375.

Statistics
Article View: 1,842
PDF Download: 1,102


counter
Journal management system. designed by sinaweb