Related Links
The effect of water softening calcium carbonate on the fluting paper properties from OCC and NSSC | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 11, Volume 32, Issue 1 - Serial Number 58, April 2017, Pages 118-130 PDF (357.28 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2017.107128 | ||
| Authors | ||
| Mina Akbari1; Ghasem asadpour* 2; noorodin nazarnezhad3 | ||
| 1Pulp and Paper student, agriculture and natural Resources university, sari, Iran | ||
| 2Assitant Prof. Department of Wood and Paper Science and Technology, agriculture and natural Resources university, Sari, Iran | ||
| 3Associate Professor, Department of Wood and Paper Science, Sari University of Agriculture and Natural Resources Sciences, Sari, Iran | ||
| Abstract | ||
| As a result of water treatment and during the water softening and hardness reducing process, calcium carbonate deposits with other impurities produced, collected and buried as mineral sludge. This study was done to investigate the effect of using calcium carbonate filler (as a byproduct of water treatment process in Mazandaran wood and paper mill) on strength properties of fluting paper produced from both old corrugated container (OCC) and neutral sulfite semi chemical(NSSC) pulps. Calcium carbonate added to the pulps at levels of 5, 10 and 15 percentage of bone dry weight of paper. The air resistant with the tensile index, burst index, tear index and resistant to fluting of handsheets were measured and compared to control handsheets (samples without calcium carbonate). The results showed that the use of calcium carbonate from the water treatment has a negative impact on fluting paper strength properties. Calcium carbonate filler negative impacts on virgin pulp (NSSC) and recycled pulp (OCC) is different and is more in OCC pulp. | ||
| Keywords | ||
| fluting paper; filler; Calcium carbonate; paper strengths properties | ||
| References | ||
|
-Afra, E., 2007. Principles of paper properties. Aeej press, Tehran. 360p.
-Akbari, M., Kaboodi, N., Torabi, H., Asadpour, Gh. and Dehghani firoozabadi, M.R., 2015. Improving the printing and writing paper properties using PCC filler modified by cationic starch. Iranian Journal of Wood and Paper Science Research, 29(4): 515-525.
-Antunes, E., Garcia, F.A.P., Ferreira, P. and Rasteiro, M.G. 2008. Flocculation of PCC filler in papermaking: Influence of the particle characteristics. Chemical Engineering Research and Design, 86(10): 1155-1160.
-Asadpour, GH., 2012. Investigation of using colloidal silica nanoparticles and CMP cationic fiber fines on fillers retention and properties of pulp and paper improvement. Ph.D. thesis. University of Agriculture and Natural Resources of Gorgan, 250p.
-Bagherzadeh, F., 2013. Determining the optimal consumption of fillers (china clay and GCC) in the fluting papers that produced from mixture of NSSC and OCC pulps with maintaining strength properties. M.Sc., thesis. University of sari agriculture and natural resources.
-Barzan, A., 1997. Investigation of the application of waste paper packaging in fluting paper production in Mazandaran wood & paper industries. M.SC thesis. Tarbiat moddares University. 95.
-Barzan, A., Resalaty, H., and Asadpour atoei Gh. 2015. Study of using water softening process byproduct, calcium carbonate on fine paper production. Iranian Journal of Wood and Paper Science Research, 30(1):1-25.
-Biermann C.J., 1996. Handbook of Pulping and Papermaking Second Edition. Academic Press Ltd., London, England.
-Christopher, J., 2007. Chemistry Paper. Aeej press, Theran. 240p.
-Ebrahimi, M., 2011. Investigation of mineral fillers retention on strength and optical properties of CMP pulp. M.Sc. thesis. University of shahid beheshti.
-Forozande sharaki, K., 2003. The principle of water treatment and purification. payame-noor press.424p. (In Persian)
-Gentile, E. 2003. Clays as fillers and coatings for paper. Presented at euro clays workshop, European clay minerals group meeting, Modena, Italy, June.
-Hamzeh, Y. and Rostampour Haftkhani, A., 2009. Principals of papermaking chemistry. Tehran university press, 424 p. (In Persian).
-Hemmasi, A.h., 2005. Application of Biotechnology in Pulp and Paper Industry. JOURNAL OF AGRICULTURAL SCIENCES Islamic Azad University, 11(1): 105-119.
-Kasmani J., Samariha A. and Nemati M. (2014). Effect of Mixing Different Contents of OCC Pulp on NSSC Pulp Strength. Bio Resources, 9(3), 5480-5487pp.
-Linen, C., Booth, G. 1990. Paper matters. Uk: paper publication.
-Lopes Velho, J., 2002. How Mineral Fillers Influence Paper Properties: Some Guidelines, Iberoamerican Congress on Pulp and paper Research.
-Lumianen, J., 2000. Refining of chemical of chemical pulp In: Gullichsen, J. and Paula Puro, H., (Eds), Paper making science and technology. Book & Fapet Oy. Jyvaskyla, Finland.
-Mehrabi, E., Resalati, H., and Mohamadzade, K. 2015. Investigation on Effect of Using Precipitated Calcium Carbonate on Paper Properties Made from CMP and Wood-Free Pulp Furnish. 22 (2): 1-17.
-Mohammadzade Saghavaz, K. Resalati, H. and Mehrabi, E., 2014. Jornal of Wood & Forest Science and Technology, Vol. 21 (2): 133-147.
-Nicu. r., bobu, e., Desbrieres , j ., 2010. Chitosan Cationic Polyelectrolyte in Wet-end papermaking systems. Cellulose Chemistry and Technology J., 10, 102-108pp.
-Norell, M., Johansson, K., and Persson, M., 2000. Papermaking Science and Technology, Book 4, Papermaking Chemistry, Chapter 3, Retention and Drainage, Finland, Fapetoy.Scott, W.E., 1996. Principles of Wet End Chemistry, Chapter 1, Introduction to Wet End Chemistry, Tappi Press, 1-4 pp
-Scott, W.E. 1996. Principles of Wet End Chemistry, Chapter 1, Introduction to Wet End Chemistry, TAPPI Press, 1-4 pp.
-Smoke, G., 2002. Pulp and Paper Technology. Aeej press, Tehran. 160p.
| ||
|
Statistics Article View: 1,294 PDF Download: 1,295 |
||
Journal management system. designed by sinaweb