Bahmani, M., Ebrahimi, G., Fathi, L. (2009). Predicting of Withdrawal Strength With Dowel Joint in Medium Density Fiber (MDF (By mathematic model. , 24(1), 117-123. doi: 10.22092/ijwpr.2009.117361
Mohssen Bahmani; Ghanbar Ebrahimi; Lyla Fathi. "Predicting of Withdrawal Strength With Dowel Joint in Medium Density Fiber (MDF (By mathematic model". , 24, 1, 2009, 117-123. doi: 10.22092/ijwpr.2009.117361
Bahmani, M., Ebrahimi, G., Fathi, L. (2009). 'Predicting of Withdrawal Strength With Dowel Joint in Medium Density Fiber (MDF (By mathematic model', , 24(1), pp. 117-123. doi: 10.22092/ijwpr.2009.117361
Bahmani, M., Ebrahimi, G., Fathi, L. Predicting of Withdrawal Strength With Dowel Joint in Medium Density Fiber (MDF (By mathematic model. , 2009; 24(1): 117-123. doi: 10.22092/ijwpr.2009.117361

Predicting of Withdrawal Strength With Dowel Joint in Medium Density Fiber (MDF (By mathematic model

تحقیقات علوم چوب و کاغذ ایران
Article 15, Volume 24, Issue 1 - Serial Number 30, September 2009, Pages 117-123    PDF (253.34 K)
Document Type: Research Paper
DOI: 10.22092/ijwpr.2009.117361
Authors
Mohssen Bahmani* 1; Ghanbar Ebrahimi2; Lyla Fathi1
1M.Sc., Wood and Paper Science, Faculty of Natural Resources, University of Tehran
2Professor, Wood and Paper Science, Faculty of Natural Resources, University of Tehran
Abstract
Although doweled joints are vastly used in furniture frame, these are little. Information about its withdrawal strength. The intent of this study is both to obtain initial and primary information concerning the withdrawal strength of dowel pin and, as far as possible, to develop generalized expression to estimate its strength. In this study, the effect of dowel diameter from three levels of 6, 8 and 10 mm and two penetration depth levels of 9 and 12 mm on withdrawal strength has been investigated. The results show that the highest withdrawal strength belongs to dowel with diameter of 8 mm and penetration depth of 12mm. Based on statistical results the experimental model of has been obtained to predict withdrawal strength.
Keywords
dowel joint; rough pin; medium density fiber; withdrawal strength
References

ابراهیمی، قنبر، 1386. طراحی مهندسی سازه مبلمان، انتشارات دانشگاه تهران.

Eckelman, C.A. (1969). Engineering Concepts of Single-pine Dowel Joint Design

Eckelman, C.A. (1971). Bending Strength and Moment Rotation Characteristics of Two-pine Moment–Resisting Dowel Joints.Forest Prod. J. 21(3): P. 35-39.

Eckelman, C.A. 2004. Engineering Design of furniture. Chap 6. Purdue Uni. USA.

Eckelman, C.A. Erdil, Y. Z., Zhang ,j (2002Withdrawal and Bending Strength of Dowel Joints Constructed of Plywood and Oriented Strandboard.Forest Prod.j. 59(9) :pp.66-74.

Said A.; Ashaari H.; Roslan A.; Hilmi M. (1993). Withdrawal and bending strength of dowel from three Malasian timbers. Journal of tropical forest science, 6: 1, P74-80.

Wang S.; Juang H.; (1997). Structural behavior of various joints in furniture. Adhesive technology and bonded tropical wood products. No. 96, P 581-601.

Zhang, J. and ET (2002). Direct withdrawal strength of single-staple joints in pine ply wood. Forest prod. J.52 (2):86-91.

 


Statistics
Article View: 261
PDF Download: 287


counter
Journal management system. designed by sinaweb