
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer on Coated Paper with Ethylene Vinyl Alcohol | ||
تحقیقات علوم چوب و کاغذ ایران | ||
Article 9, Volume 34, Issue 2 - Serial Number 67, August 2019, Pages 255-262 PDF (640.6 K) | ||
Document Type: Research Paper | ||
DOI: 10.22092/ijwpr.2019.126869.1557 | ||
Authors | ||
somayeh heydari1; Ahmad Reza Saraeyan* 2; Mohamadreza Dehghani firozabadi3; Alireza Shakeri4; babak shokri5 | ||
1Ph.D.,Student, Pulp and paper, Gorgan University of Agricultural sciences and Natural Resources, Department of Wood & Paper Engineering, Iran, Gorgan | ||
2IRAN-Gorgan- Gorgan university of Agricultural sciences and Natural Resources | ||
3Associate Prof., Pulp and paper, Gorgan University of Agricultural sciences and Natural Resources, Department of Wood & Paper Engineering, Gorgan, Iran | ||
4Associate Prof., Industrial Polymer, Department of Chemistry, Tehran University, Tehran, Iran | ||
5Prof., Laser-plasma Research Institute, Shahid Behshti University, Tehran, Iran | ||
Abstract | ||
Ethylene vinyl alcohol (EVOH) copolymer is of semi crystalline materials with excellent barrier properties to gases. Also, it has shown outstanding chemical resistance. Despite its low gas permeability, EVOH copolymer displays poor water and water vapor resistance. In this study, Trimethoxymethylsilane (as hydrophobic coating) was deposited by Plasma Enhanced Chemical Vapor (PECVD) method on the coated paper with Ethylene vinyl alcohol in order to improve the paper's barrier properties of moisture transmission. Coating by PECVD method was done in the certain conditions of time 6 min and pressure 300 m Torr. Different treatments were applied for power including 50, 70 and 90W.Then contact angle was measured in order to determined improvement of the paper's barrier properties of moisture transmission . The result showed that papers which were coated with Trimethoxymethylsilane had higher contact angle water 55.7% more than the control. The results revealed that the best condition was obtained by 50 W power. The structural and chemical properties of deposited layer were observed with Fourier Transform infrared spectroscopy- Attenuated Total Reflectance (FTIR-ATR) and Energy Dispersive X-ray Spectroscopy (EDS). The results confirmed bonding of silane on the surface EVOH polymer. | ||
Keywords | ||
Ethylene vinyl alcohol; Trimethoxymethylsilane; Plasma; Contact angle water | ||
References | ||
-Arkles, B., 2011. Hydrophobicity, Hydrphilicity and silane surface modification. Gelest, Inc, 84pp. -Bahroun, K., Behm, H., Mitschker, F., Awakowicz, P., Dahlmann, R and Hopmann, Ch., 2013. Influence of layer type and order on barrier properties of multilayer PECVD barrier coatings. J. Phys. D: Appl. Phys, 47: (8pp) -Bandyopadthay, A., Romarao, B. and Ramaswamy, S., 2002. Transient moisture diffusion through paperboard materials. Colloid Surf A, 206: 455–67. - Bieder, A., Gruniger,A and Rudolf, Ph.,2005. Deposition of SiOx diffusion barriers on flexible packaging materials by PECVD. Surface & Coatings Technology, 200: 928– 931 -Brijeshkumar, B., 2016. Deposition and characterization of organosilicon films deposited by PECVD method. Master Thesis, Department of Production Engineering, The Technological University in Partial Fulfillment, Gujarat. -Cabedo, L., Lgaron, J. M., Caua, D., Saura, J. J. Gimenez, E., 2006. Active Role of ZnO Nanorods in Thermomechanical and Barrier Performance of Poly (vinyl alcohol-co-ethylene) Formulations for Flexible Packaging. Polym. Test, 25: 860−867. -Garcia, J., Mota, J. and Bautista, L., 2012. Poly (Acrylic) Deposition by AP-PECVD processes on paper substrates for packaging application. Proceeding 13 th PSE conference, 4pp. -Iwamoto, R., Amiya, S., Saito, Y. and Samura, H., 2001. FT-NIR spectroscopic study of OH groups in EVOH copolymer. Applied Spectroscopy, 55:864-870. - Li, N., Lun, Y., Hong, J., Shchelkanov, A., N. and Ruzic, D., 2017.SiOx Deposition on Polypropylene-coated Paper with a Dielectric Barrier Discharge at Atmospheric Pressure. IEEE, 7PP. -Lopez-Rubio A., Lagaron, J.M., Gimerez, E., Cava, D., Hernandez-Munoz, P.,Yamamoto, T. and Gavara, R., 2003. Morphological alterations induced by temperature and humidity in ethylene vinyl alcohol copolymers. Macromolecules, 36: 9467–9476. | ||
Statistics Article View: 732 PDF Download: 421 |