Related Links
Influence of thermally modification of ash and spruce on the functionality of fungal destructive agent (Coniophora puteana) | ||
| تحقیقات علوم چوب و کاغذ ایران | ||
| Article 2, Volume 38, Issue 3 - Serial Number 84, September 2023, Pages 170-180 PDF (980.19 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22092/ijwpr.2023.362572.1755 | ||
| Authors | ||
| Seyedeh Masoomeh Zamani1; Reza Hajihassani* 2; Kamyar Salehi1 | ||
| 1Assistant Prof., Research Institute of Forests and Rangelands, Agricultural Research Education and Extension Organization (AREEO), Tehran, Iran. | ||
| 2Assistant Prof., Wood and Forest Products Science Research Division, Research Institute of Forests and Rangelands, Agricultural Research Education and Extension Organization (AREEO) P.O. Box 13185-116, Tehran, Iran | ||
| Abstract | ||
| Abstract The purpose of this study was to evaluate effectiveness of brown rot fungus on ash (Fraxinus Sp.) and spruce (Picea Sp.) thermo-wood and also thermally modification on fungal functionality. In first step, prepared wood samples of both species were heat treated under 212 ºC for 3 hours. Afterwards, heat-treated and untreated wood specimens were exposed to brown rot fungus for 16 weeks based on EN 313 and the functionality of fungal destructive agent and also its effect on physical and mechanical properties were finally analyzed. The obtained results showed that the brown rot fungus has been more efficiency on untreated specimens in compared with thermo-wood in both two wood species and caused more destruction and mass loss. Moreover, the results revealed that some physical and mechanical properties include density, compression parallel to grain and impact strength of exposed heated specimens to brown rot fungus were more than unexposed heated specimens to this fungus. Evaluation of laccase activity which produced by brown rot fungus showed more its effect on controls than heat treated specimens in both wood species. Based on the results, thermally modification can generally causes improvement of biological resistance, reduction of some physical and mechanical properties as well as more stability of applied properties of ash and Picea wood which exposed to the brown rot fungus. | ||
| Keywords | ||
| thermally modification; brown rot fungus; physical and mechanical properties; biological resistance | ||
| References | ||
|
-American society for testing of materials. ASTM D 143-09. (2014). Standard methods of testing small clear specimens of timber.
-American society for testing of materials. ASTM D256. (2018). Standard test methods for determining the Izod pendulum impact strength of plastics.
-Ayata, U., Akcay, C. and Esteves, B., 2017. Determination of decay resistance against Pleurotus ostreatus and Coniophora puteana fungus of heat-treated scoth pine, oak and beech wood species. Maderas, Ciencia y tecnología. 19: 3. 309-316.
-Delucis, R., Machado, S.F., Missio, A.L. and Gatto, D.A., 2019. Decay resistance of two-step freezing–heat-treated fast-growing eucalyptus wood. J. of the Indian Academy of Wood Science, 16: 2. 139-143.
-Farahani, M.R.M., Hill, C.A.S. and Hale, M.D.C., 2001. The effect of heat treatment on the decay resistance of Corsican pine sapwood. In: Proceedings 5th European panel products symposiumm. Pp: 303–308.
-Ferraz, A., Córdova, A.M. and Machuca, A., 2003. Wood biodegradation and enzyme production by Ceriporiopsis subvermispora. Enzyme and Microbial Technology. 32: 1. 59-65.
-Field, J.A., Jong, E., Feijoo-Costa, G. and Bont, J.A.M., 1993. Screening for ligninolytic fungi applicable to the biodegradation of xenobiotics. Trends Biotechnol. 11: 44-49.
-Gaff, M., Babiak, M., Kačík, F., Sandberg, D., Turčani, M., Hanzlík, P. and Vondrová, V., 2019. Plasticity properties of thermally modified timber in bending–the effect of chemical changes during modification of European oak and Norway spruce. Composites Part B: Engineering. 165: 5. 613-625.
-Ghorbani, M., Nikkhah Shahmirzadi, A. and Toopa, A., 2020. Effect of densification on the practical properties of chemical and thermal modified poplar wood. Iranian J. of Wood and Paper Industries, 11: 2. 185-197.
-González-Peña, M.M. and Hale, M.D.C., 2007. The relationship between mechanical performance and chemical changes in thermally modified wood. In: Proceedings 3rd European conference on wood modification. Pp: 169–172.
-González-Peña, M.M., Breese, M.C. and Hill, C.A.S., 2004. Hygroscopicity in heat treated wood: Effect of extractives. In: Proceedings 1st international conference on environmentally- compatible forest products. Pp: 105–119.
-Icel, B., Guler, G., Isleyen, O., Beram, A. and Mutlubas, M., 2015. Effects of industrial heat treatment on the properties of spruce and pine woods. BioResources. 10: 3. 5159-5173.
-Kamperidou, V., 2019. The biological durability of thermally-and chemically modified black pine and poplar wood against basidiomycetes and mold action. Forests. 10: 12. 1111-1128.
-Kaygin, B., Gunduz, G. and Aydemir, D., 2009. The effect of mass loss on mechanical properties of heat treated Paulownia wood. Wood Research. 54: 2. 101-108.
-Mburu, F., Dumarc, S., Huber, F., Petrissans, M. and Gérardin, P., 2007. Evaluation of thermally modified Grevillea Robusta heartwood as an alternative to shortage of wood resource in Kenya. Characterisation of physicochemical properties and improvement of bio-resistance. Bioresource Technology. 98: 18. 3478–3486.
-Militz, H., 2002. Thermal treatment of wood. European processes and their background, IRG/WP 02-40241. 33rd Annual Meeting, 12-17 May, Cardiff-Wales, 4: 1-17.
-Militz, H. and Tjeerdsma, B., 2001. Heat treatment of wood by the PLATO process. In: Rapp AO, Editor, Review on heat treatments of wood. COST ACTION E22: Environmental optimisation of wood protection. Pp: 27–38.
-Obataya, E. and Tomita, B., 2002. Hygroscopicity of heat-treated wood II, Reversible and irreversible reductions in the hygroscopicity of wood due to heating. Mokuzai Gakkaishi. 48: 4. 288–95.
-The European Standard EN 113., 1997. Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes.
-Welzbacher, C.R. and Rapp, A.O., 2004. Determination of the water sorption properties and preliminary results from field tests above ground of thermally modified material from industrial scale processes. In: 35th Annual Meeting, International Research Group on Wood Protection, IRG/WP 04–40279.
-Wentzel, M., Fleckenstein, M., Hofmann, T. and Militz, H., 2019. Relation of chemical and mechanical properties of Eucalyptus nitens wood thermally modified in open and closed systems. Wood Material Science & Engineering. 14: 3. 165-173. | ||
|
Statistics Article View: 438 PDF Download: 372 |
||
Journal management system. designed by sinaweb