1.

The effect of pulp and cellulose nanofiber cyanoethylation on the physical properties of transformer insulating paper

Pages 1-13
Mohammad Azadfallah; Hamid khodabandehlo; Amir abas Shayeghani akmal
2.

Effect of silica dioxide on natural resistance and morphological study of wood plastic composite against of white rot fungi (Trametes Versicolor)

Pages 14-29
Saeid Ismaeilimoghadam; Afsaneh Shahraki; Fatemeh Dehdast; Samaneh Pourkarami
3.

The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite

Pages 30-39
Alireza Beiazyat; Laya Jamalirad; Hedayat alah Aminian; Sahab Hejazi
4.

The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF)

Pages 40-47
Mostafa Poozesh; Hamid Reza Mansouri; babak Nosrati; Alireza Samzadeh
5.

The effect of using deinked mixed office waste pulp on the properties of Alkaline Proxide Mechanical Pulp from cotton stalk

Pages 48-57
Mehrnoosh Tavakoli; saraeyan ahmad reza; hossein resalati; ali ghasemian
6.

Investigation of the storage time on color properties and chemical compositions of particle board made from bagasse

Pages 58-66
Mehdi Jonobi; Shabo Salehpoor; zhreh Araaznia; Yahya Hamzeh
7.

Investigation on the tensile properties and dimensional stability of polypropylene/wheat straw fiber/paper mill sludge composites

Pages 67-77
Habib alah Khademieslam; Mehdei Kalagar
8.

The Study of Pulp-Polypropylene biocomposites Properties produced from non-extracted and pre-extracted Bagasse with hot water

Pages 78-91
Alireza Sokhtesaraei; Sahab Hejazi; Laya Jamalirad; Mohammad Ahmadi; Sead behnam Hosseini
9.

Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose

Pages 92-104
Hassan Ziaei Tabari; Habibollah Khademieslam; Behzad Bazyar; Amir Homan Hemmasi
10.

Studying the effect of acetylation Beech on interfacial bonding resistance of transparent paint (nitrocellulose lacquer, asid catalyzed lacquer and Half Ppolyester)

Pages 105-117
shahram tahmasebi; behzad bazyar; habibolah Khademi Islam; mohammad Ghofrani
11.

Structural Performance of Corner Joint Reinforced with FRP under Diagonal Tension Loading

Pages 118-129
Hamideh Abdolzadeh; Ghanbar Ebrahimi; Mohammad Layeghi
12.

Biodegradation and migration behavior of cellulose nanocrystal - nanoclay reinforced PLA composites

Pages 130-140
Behzad Kord; Mehdi Roohani
13.

The effect of core layer treatment and almond shell powder content in the glue line on the pull off adhesion sandwich panel

Pages 141-153
Morteza Nazeryan; Vahid Moazemi; Rahim Mohebi gargari
14.

The Effect of Micro-Cellulose Length on Mechanical, Thermal and Morphological Properties in Nano/Wood Plastics Composites

Pages 154-165
Amir Norbakhsh; Abolfazl Kargarfard
15.

Application of nano silver in the production of antibacterial banknote paper

Pages 166-179
omid yazdani aghmashhadi; Ghasem Asadpoor; Esmaeil Rasoli garmarodi; Reza Imani


counter
Journal management system. designed by sinaweb